In trading, a fill means that some or all of an order has actually been executed. If you submit an order to buy 100 shares and all 100 shares trade, the order is fully filled. If only 40 shares trade, you have a partial fill and 60 shares remain unfilled unless the order instructions require the remainder to be canceled.
The key distinction is simple: placing an order expresses an instruction, while a fill records an execution. An order can be accepted by a broker or trading venue without being filled. It may remain open, fill in several pieces, be canceled, expire, or be rejected depending on its terms and market conditions.
This is why traders should pay attention to three separate details after submitting an order: filled quantity, fill price, and remaining quantity. Together, they show what actually happened rather than what the trader originally requested.
What Does Fill Mean in Trading?
When traders ask what does fill mean in trading, they are usually asking whether an order has become a completed transaction. A fill occurs when a buy order is matched with a seller or a sell order is matched with a buyer under terms that permit execution. The filled quantity becomes part of an executed trade.
For stock orders, Investor.gov explains that an order normally goes through a broker before it reaches or is executed in a market, and that execution is not literally instantaneous. Prices and available quantities can change while the order is being handled. The same basic idea applies across many electronic markets even though the exact routing, matching, and settlement rules differ by asset class and venue.
A fill can therefore describe one execution or one piece of a larger order. Suppose you send an order to buy 500 shares. If 200 shares execute first and another 300 execute a moment later, the order has two fills but ends with a fully filled status. Your trading platform may display each execution separately or combine them into an average execution price.
Order Fill Statuses Explained
Platforms use slightly different wording, but order status separates instructions still working from quantities already executed. The most useful statuses are these:
| Status | What it usually means | What happens next |
|---|---|---|
| Open or working | The order has been accepted but has not been fully executed. | It may fill later, remain open, expire, or be canceled. |
| Partially filled | Only part of the requested quantity has executed. | The remaining quantity may continue working or may be canceled according to the order instructions. |
| Filled | The requested executable quantity has completed. | No quantity from that order remains open. |
| Canceled | The remaining unfilled quantity has been withdrawn. | Any quantity filled before cancellation normally remains an executed trade. |
| Expired | The order reached the end of its permitted time without fully executing. | The remaining quantity stops working. |
| Rejected | The broker or venue did not accept the order for execution. | No fill occurs from the rejected instruction. |
The underlying quantities matter more than the label. After a partial fill, confirm how much executed and whether the remaining quantity is still active.
What Is an Order Fill?
An order fill is the execution produced from an order. One order can generate one fill or many fills. The number of fills depends on available liquidity, order size, order type, routing, price conditions, and the rules of the trading venue.
Imagine a trader submits a market order to buy 1,000 shares. There are 400 shares available at the best offer, 350 at the next price level, and another 250 at a slightly higher price. The order could be completed through three separate fills. The trader still submitted only one order, but that order interacted with multiple quantities at multiple prices.
An order ticket describes what you asked the broker to do, while execution records describe what actually traded. Several fill records under one order identifier can therefore belong to the same order.
Partial Fill Meaning
The partial fill meaning is that only part of the requested order quantity has executed. If you submit an order for 1,000 shares and 300 shares execute, the order is 30 percent filled and 700 shares remain unresolved. Those 700 shares may stay active, expire, or be canceled depending on the time-in-force instruction and the broker or venue rules.
FINRA notes that a stock trade can be filled partially or not at all when a firm cannot find enough buying or selling interest that meets the order terms. Partial fills can be more likely with certain order types, large orders, or securities that trade less frequently.
A partial fill does not mean the executed portion is provisional. The portion that filled is already an execution. Canceling the remaining quantity generally stops only the unfilled balance. For example, if 300 of 1,000 shares fill and you cancel the balance, you still have the 300-share execution.
Why do partial fills happen?
Partial fills usually arise because the full requested quantity is not immediately available at eligible prices. A limit order may be willing to buy only up to a specified price, while the market may offer only a smaller quantity at or below that limit. A larger order may also need to interact with several counterparties or price levels before it can be completed.
Order priority can matter as well. Other orders may already be waiting at the same price, so limited incoming liquidity may execute only part of your order. Priority rules vary by venue.
What happens to the unfilled balance?
The answer depends on the order's instructions. A standard day limit order may leave the remaining quantity active for the rest of the trading session. A good-till-canceled instruction may keep eligible quantity working longer under the broker's policy. An immediate-or-cancel instruction attempts immediate execution and cancels any portion that cannot fill right away.
A fill-or-kill instruction is stricter. Investor.gov describes a fill-or-kill stock order as one that must execute immediately in its entirety or be canceled, so partial execution is not permitted. This is different from an immediate-or-cancel order, which can accept a partial fill and cancel only the remainder.
What Is the Fill Price?
The fill price is the price at which an execution actually occurs. It is not necessarily the same as the price visible on the screen when you entered the order, the last traded price, the stop price, or even the price you expected to receive.
For a single execution, the fill price is straightforward. If 100 shares are bought at $25.10, the fill price is $25.10 per share. If one order executes in several pieces, each piece can have its own fill price. The broker may also show a weighted average fill price for the completed or partially completed order.
For example, suppose a 1,000-share buy order receives these fills:
- 400 shares at $25.10
- 350 shares at $25.12
- 250 shares at $25.15
The weighted average fill price is calculated from the actual quantity executed at each price. In this example, the average is $25.1195 per share, which a platform may display as approximately $25.12 depending on its rounding rules.
A weighted average is necessary because larger fills should influence the average more than smaller ones.
Fill Price vs Order Price
The relationship between order price and fill price depends on the order type. This is one of the most important distinctions for understanding execution results.
| Order type | What the trader specifies | How fill price works |
|---|---|---|
| Market order | Quantity but no fixed execution price | The order seeks execution at available market prices, so the final fill price can differ from the displayed quote. |
| Limit buy | Maximum acceptable purchase price | A fill can occur at the limit price or lower. |
| Limit sell | Minimum acceptable sale price | A fill can occur at the limit price or higher. |
| Stop order | A trigger price | Once triggered, a standard stop order becomes a market order, so the stop price is not a guaranteed fill price. |
| Stop-limit order | A stop trigger and a limit price | After activation, execution is constrained by the limit, which can prevent a fill if the market moves beyond the acceptable price. |
A limit price is therefore a boundary, not a promise that the order will trade at exactly that number. A buy limit at $50 can fill at $50 or below if matching liquidity is available. It can also remain unfilled even if the market briefly displays $50 because displayed prices can change and other orders may have priority.
Why Can One Order Have Several Fill Prices?
One order can have several fill prices when there is not enough available quantity at a single price to complete the entire order. The execution process may consume liquidity across multiple price levels. This is common enough that traders should distinguish the best displayed price from the total price available for their full order size.
Consider a market buy for 2,000 shares. If only 500 shares are offered at $10.00, another 700 at $10.02, and the remaining 800 at $10.05, the order may fill across all three levels if those prices are still available when the order reaches them. The first fill does not guarantee that every remaining share will receive the same price.
This effect is closely related to liquidity and market depth. A highly liquid instrument may have substantial quantity available close to the best bid and ask. A thinner market may have less quantity available near the top of the book, making larger orders more likely to receive multiple execution prices.
What Is Slippage in Relation to a Fill?
Slippage is the difference between an expected reference price and the actual execution price. The fill is the execution itself. Slippage is a way of comparing that fill with what the trader expected or observed before execution.
For example, a trader sees an offer at $20.00 and submits a market buy. If the order fills at an average price of $20.04, the trader experienced 4 cents of adverse slippage relative to the $20.00 reference. If it fills at $19.99, the execution is better than that reference price.
Not every difference between the screen price and fill price indicates an error. Quotes can change and may represent limited quantity. Order size, spread, market depth, routing, and latency can also affect execution. Fill quality should be judged against the market conditions that existed when the order was handled.
How Market and Limit Orders Affect Fills
Market orders generally prioritize execution over price control. They are designed to trade against available liquidity, but the exact price is not guaranteed. This makes them more likely to fill quickly when sufficient counterparties are available, while also exposing the trader to price movement across available levels.
Limit orders reverse that trade-off. They give the trader control over the worst acceptable execution price but do not guarantee execution. A buy limit order can sit unfilled below the current offer. A sell limit order can remain unfilled above the current bid. Even when the market reaches the limit price, available quantity and queue position can affect whether the order receives a fill.
The choice is between execution priorities. Market orders emphasize completion, while limit orders emphasize a price boundary. Neither removes execution risk.
Fill vs Execution vs Settlement
Fill and execution are closely related. In everyday trading language, a fill is an execution of some quantity from an order. A fully filled order has had its executable requested quantity completed.
Settlement is a later stage. Execution establishes the trade terms, while settlement is the process through which the securities and cash are formally exchanged according to the rules of the relevant market. A trading app can therefore show an order as filled even though settlement has not yet completed.
Filled therefore describes execution status, not completion of clearing or settlement.
How to Read a Fill Confirmation
After an order executes, review the confirmation or execution details instead of relying only on the headline order status. The most useful fields normally include:
- Order quantity: the total amount originally requested.
- Filled quantity: the amount that has actually executed.
- Remaining quantity: the amount still open or unresolved.
- Fill price: the execution price for an individual fill.
- Average fill price: the quantity-weighted average when the order has multiple fills.
- Execution time: when each trade occurred.
- Order type: the instruction governing execution such as market or limit.
- Time in force: how long the unfilled portion is allowed to remain active.
Also check whether commissions, exchange fees, regulatory charges, or other transaction costs are shown separately. The fill price normally refers to the execution price itself, while the total economic cost of the trade can include additional charges depending on the product and brokerage arrangement.
Common Fill Problems and What They Mean
A fill that looks unusual is not automatically incorrect. The first step is to identify the order type and compare the actual execution with the order instructions.
- The order did not fill: A limit may have been outside the available market, the order may have lost priority to earlier orders, trading may have been paused, or the order terms may not have been executable.
- Only part of the order filled: There may not have been enough eligible liquidity for the full quantity. Check whether the remainder is still open or was canceled.
- The market order filled at a worse price: The visible quote may have changed or may not have contained enough quantity for the entire order.
- The limit order filled at a better price: A limit sets the worst acceptable price, so price improvement can produce a more favorable fill.
- The stop filled away from the stop price: A stop price is a trigger. Once a standard stop becomes a market order, the actual fill depends on available prices.
- The order shows several executions: A single order may be matched against multiple counterparties or price levels, creating several fills.
If an execution appears inconsistent with the order terms, preserve the order ticket, timestamps, confirmation, and execution details so the result can be reviewed accurately.
What Traders Should Remember About Fills
A fill is the point where an order becomes an actual trade for a stated quantity and price. A full fill completes the order quantity. A partial fill completes only part of it. The fill price is the actual execution price, and a multi-part order can have several fill prices plus a weighted average price.
The practical lesson is to separate the instruction from the outcome. The price entered on an order ticket may be a limit, a trigger, or no fixed price at all. What determines the position you actually acquire or dispose of is the filled quantity and the execution price recorded in the trade confirmation.