Forex margin is the amount of account equity set aside to support a leveraged position. It is not a trading fee and it is not the full value of the currency position. When a broker requires 2% margin, for example, a position with a notional value of $100,000 requires $2,000 of margin before any additional broker rules or currency conversions are considered. The remaining account equity may stay available as free margin, but the entire account is still exposed to gains and losses from the leveraged position.

The three figures traders need to separate are used margin, free margin and margin level. Used margin is the total amount currently committed to open positions. Free margin is the equity that remains after used margin is deducted. Margin level expresses equity relative to used margin as a percentage. Together they show how much capacity the account has before losses create pressure on its margin requirements.

What is forex margin?

Margin is collateral for leveraged trading. Instead of paying the full notional value of a forex position, the trader provides a required fraction of that value. The broker or dealer then allows exposure to a larger position. A 5% margin requirement corresponds to 20:1 leverage because 1 divided by 0.05 equals 20. A 2% requirement corresponds to 50:1 leverage.

This relationship makes margin and leverage two ways of describing the same basic constraint. A lower margin requirement permits more notional exposure for the same amount of account equity. That does not make the trade cheaper in economic terms. It increases the size of the position that can move against the account. The Commodity Futures Trading Commission warns that a 2% margin requirement can support a $100,000 position with $2,000 and that high leverage magnifies both gains and losses.

Margin requirements also depend on the legal and product framework. Retail spot forex in one jurisdiction may be governed differently from rolling spot products or forex CFDs in another. Brokers can also impose requirements above a regulatory minimum. For that reason, traders should treat the margin rate shown on their own account and instrument specification as the operational figure that controls position opening.

How margin is calculated

The basic calculation starts with the position's notional value and the margin rate:

Required margin = position notional value in the account currency × margin rate

If leverage is quoted instead of a margin rate, the equivalent calculation is:

Required margin = position notional value in the account currency ÷ leverage

Suppose a trader opens a $50,000 notional position with a 2% margin requirement. The required margin is $50,000 × 0.02 = $1,000. The same result follows from 50:1 leverage because $50,000 ÷ 50 = $1,000.

The calculation becomes less direct when the position's notional value is not already expressed in the account currency. A standard forex position is usually described in units of the base currency. If the account is denominated in another currency, the platform must convert the relevant notional amount or margin requirement using an applicable exchange rate. That is why the exact margin displayed by a platform can change slightly as exchange rates move even when the trade size itself does not change.

Example with an account currency conversion

Assume an account is denominated in US dollars and a trader opens a EUR/GBP position with a notional size of €100,000. If the required margin rate is 5%, the position first requires margin equivalent to €5,000. Because the account is in dollars, that €5,000 must then be converted into USD at the rate used by the broker. If EUR/USD is 1.10 for the relevant conversion, the required margin would be approximately $5,500.

This example shows why a simple lot-size shortcut can be misleading. Margin is ultimately based on notional exposure and the applicable margin rate, then translated into the account currency where necessary. Contract specifications, instrument type and broker methodology can affect the exact implementation.

What is used margin?

Used margin is the total margin currently allocated to open positions. If an account has one trade requiring $1,000 of margin and another requiring $600, used margin is $1,600, assuming there are no broker-specific offsets or special portfolio rules.

Used margin is not the same as the amount at risk on the trades. A position can lose far more than the margin initially allocated to it because profit and loss are generated by the full notional exposure. Margin is therefore better understood as the amount reserved to maintain leveraged exposure rather than a maximum-loss figure.

Used margin can increase when a trader opens additional positions, when the broker raises the margin requirement or when currency conversion changes the account-currency value of required margin. It can decrease when positions are closed or when a margin requirement falls. Some brokers may also apply different rates during periods of elevated volatility or to particular currency pairs.

Regulatory rules illustrate why margin rates are not globally uniform. In the United States the National Futures Association requires Forex Dealer Members to collect minimum security deposits of 2% of notional value for specified major currencies and 5% for other forex transactions. These are regulatory minimums for that framework rather than universal forex margin rates.

What is free margin?

Free margin is the portion of equity that is not currently committed as used margin. The standard account relationship is:

Free margin = equity − used margin

To understand this figure, first separate balance from equity. Balance generally reflects the account after closed trades and posted cash movements. Equity adjusts that balance for the unrealized profit or loss of open positions. As open trades move, equity moves with them. Free margin therefore changes even when no new trade is opened.

For example, assume an account balance of $10,000 and no floating profit or loss. Equity is $10,000. If used margin is $2,000, free margin is $8,000. Now assume the open positions develop a $1,500 unrealized loss. Equity falls to $8,500. With used margin still at $2,000, free margin falls to $6,500.

If the same positions instead show a $1,000 unrealized profit, equity rises to $11,000 and free margin becomes $9,000. This is why free margin should be viewed as a dynamic buffer rather than spare cash that is economically detached from open trades.

Why free margin matters before a new trade

A broker generally checks whether sufficient free margin is available before accepting another leveraged position. If the new position would require more margin than the account can support, the order may be rejected or the permitted trade size may be smaller.

High free margin does not by itself mean the account is low risk. A trader can have substantial free margin while holding very large positions that are highly sensitive to market movement. The useful question is not only whether another trade can be opened but also how much adverse price movement the existing portfolio could absorb before equity approaches the broker's closeout threshold.

What is margin level?

Margin level is a percentage that compares equity with used margin. A common platform formula is:

Margin level = equity ÷ used margin × 100

If equity is $10,000 and used margin is $2,000, the margin level is 500%. If equity falls to $6,000 while used margin remains $2,000, the margin level falls to 300%. If equity falls to $2,000, the margin level becomes 100%.

A falling margin level usually means the account has less equity relative to the margin supporting its positions. The figure can fall because open losses reduce equity, because the trader opens more positions and increases used margin or because margin requirements rise. It can rise when profits increase equity, positions are closed or additional funds are credited to the account.

When there is no used margin because there are no open margined positions, the percentage may be undefined or displayed differently by the platform. That is a presentation issue rather than evidence that the account has infinite trading capacity.

Used margin and free margin compared

Metric What it measures Basic calculation What makes it change
Balance Account value from realized results and cash movements Platform account balance Closed trades and deposits or withdrawals
Equity Current account value including open profit or loss Balance + unrealized P/L Market movement and balance changes
Used margin Margin allocated to open positions Sum of required margin across positions Position size and margin rates
Free margin Equity not committed as used margin Equity − used margin Equity changes and used margin changes
Margin level Equity relative to used margin Equity ÷ used margin × 100 Any change in equity or used margin

The key connection is that unrealized profit and loss flows first through equity. Because free margin and margin level both use equity in their formulas, they react immediately to open-market losses or gains. Used margin may stay unchanged while the other two figures move sharply.

How a losing trade affects forex margin

Consider an account with a $10,000 balance and $2,000 of used margin. At the start, with no unrealized profit or loss, equity is $10,000, free margin is $8,000 and margin level is 500%.

If the open portfolio loses $3,000, equity falls to $7,000. Free margin becomes $5,000 and margin level becomes 350%. If the floating loss grows to $6,000, equity falls to $4,000. Free margin becomes $2,000 and margin level becomes 200%.

If the loss grows to $8,000 while used margin stays at $2,000, equity becomes $2,000, free margin becomes $0 and margin level reaches 100%. At that point the account has no equity left above the amount currently required as margin. Whether new orders are blocked before or at this point depends on the broker's rules.

A further decline can make free margin negative. Negative free margin means account equity is below used margin. It does not by itself identify the exact closeout point because the stop-out rule depends on the broker and applicable regulation.

Margin call and stop out are not the same thing

A margin call is commonly a warning or account condition indicating that equity has become too low relative to required margin. A stop out or margin closeout is the point at which the broker begins closing positions under its rules. Platforms often use these terms differently, so traders should not assume that a margin call at one broker has the same percentage or consequence at another.

There is also no single worldwide margin-level threshold for forced closure. Under the UK rules for restricted speculative investments such as retail CFDs, the Financial Conduct Authority requires firms to close positions when a retail client's funds fall to 50% of the margin needed to maintain open positions. The FCA also makes clear that firms may close positions at a higher percentage. Other jurisdictions and products can follow different rules.

This distinction matters because many trading platforms show a margin level calculated from equity and used margin, while the legally or contractually relevant closeout rule may be expressed in different terminology. The account agreement and instrument specification determine what actually happens when equity deteriorates.

How to read margin figures before placing a trade

  1. Identify the margin rate or leverage for the exact instrument. Do not assume every currency pair has the same requirement.
  2. Convert the intended trade into notional value. Lot size is only useful when translated into the actual currency exposure behind the position.
  3. Estimate required margin in the account currency. Apply the margin rate and include any needed currency conversion.
  4. Check current equity rather than balance alone. Open losses can materially reduce the resources available to support another position.
  5. Recalculate free margin after the proposed trade. New used margin reduces the remaining buffer immediately.
  6. Estimate the new margin level. Divide projected equity by projected used margin and multiply by 100.
  7. Compare the result with the broker's actual warning and closeout rules. The displayed ratio is useful only when interpreted alongside the account agreement.

This sequence separates two decisions that are often mixed together: whether the account has enough margin to open a trade and whether the trade size leaves a reasonable loss-absorbing buffer after it is opened.

Common forex margin mistakes

  • Treating margin as maximum loss. Required margin is collateral. Losses are driven by the full leveraged exposure and market movement.
  • Using balance instead of equity. Balance can look healthy while unrealized losses have already reduced the account's actual equity.
  • Assuming free margin is risk-free cash. Free margin can disappear quickly when open positions lose value.
  • Equating high leverage with low capital requirements only. Higher leverage also means a given account can take larger exposure and therefore larger losses.
  • Assuming every broker uses the same stop-out percentage. Closeout policies vary by jurisdiction, product and firm.
  • Ignoring currency conversion. A position denominated outside the account currency may require conversion before its margin can be stated correctly.
  • Opening a trade based on available margin alone. An order can be permitted by the platform while still leaving very little room for adverse price movement.

What margin figures can and cannot tell you

Margin figures are useful for account capacity and liquidation risk, but they do not measure the full quality of a trading decision. A 500% margin level does not reveal whether positions are concentrated in correlated currency pairs, whether a stop is appropriately placed or whether a major market event could create a gap or sharp repricing.

Likewise, a high free margin number does not establish that losses are limited. It simply shows the current difference between equity and used margin. If the portfolio has large notional exposure, a relatively small adverse market move can change equity quickly.

The most useful interpretation is therefore mechanical. Used margin tells you how much equity is allocated to maintaining current leveraged positions. Free margin tells you how much current equity remains above that allocation. Margin level tells you the ratio between the two. Risk management still requires a separate decision about position size, acceptable loss and the possibility that execution can occur at a worse price than expected.

Margin and leverage should be read together

Margin defines the collateral needed to support a leveraged forex position. Used margin totals the collateral supporting current positions, free margin shows equity left above that amount and margin level expresses equity relative to used margin.

The arithmetic is simple, but the account consequences depend on the broker's rules. Before trading, confirm the exact margin rate, currency-conversion method and closeout threshold for the instrument. Those terms determine how a change in equity can move the account from ordinary fluctuation to restricted trading or forced position closure.